Nippy E1 Electric Scooter

£1,000.00

Out of stock

Description

An illuminated deck and a folding frame

LED deck lights trace the edge of the Nippy E1’s footboard. The scooter rides on 6.5-inch solid tyres with suspension at both wheels. After a ride, the frame folds for storage.

The illuminated side edge and textured foot deck of the Nippy E1 scooter
  • 200 WNominal motor power
  • 6.5 inchSolid tyres
  • 12 kmTypical range

Push off to get rolling. Once the scooter is travelling above 3 km/h, the thumb throttle engages the electric drive. An LED display sits at the handlebar, alongside the controls for the electronic brake.

Technical specifications
Recommended age8–14 years, subject to size and riding ability
Recommended rider height130–160 cm
Rider weight range20–70 kg
Motor200 W nominal, 250 W maximum
Maximum speed16 km/h (approximately 10 mph)
Typical range12 km
Battery21.6 V, 5.2 Ah lithium-ion
Charging timeApproximately 3–4 hours
Tyres6.5-inch solid synthetic rubber
BrakingElectronic brake
SuspensionFront and rear
LightingDeck LEDs
ThrottleThumb throttle, with powered acceleration above 3 km/h
FeaturesLED display, folding system and kickstand
FrameSteel
Dimensions (L × W × H)95 × 34 × 101 cm
Net weight10 kg
AssemblyHandlebar installation required before use

Range varies with rider weight, surface, temperature and battery condition.

Rider fit

The manual gives three fit requirements for the E1. The rider should be aged 8–14, stand 130–160 cm tall and weigh 20–70 kg. Check they can balance and reach both controls comfortably.

Use and care

Use on suitable dry private paved areas with permission and adult supervision. Wear a helmet and protective equipment. Check the folding mechanism, brake and tyres before riding. Follow the supplied manual for charging, cleaning and storage.

Questions about the Nippy E1? Email Nippy Bikes.